A Like, Rating or Comment is a huge help and I really appreciate all of it. 🙏

Want to support my work? 
You can buy me a coffee and support my work here: https://ko-fi.com/mikegyverminis

Commercial Licensing is also available here as well to sell all of my models
 

Looking for More DnD Minis?

Check out the whole collection with new ones added all the time.

==========================================================

DnD TTRPG Great Stag Miniature

Towering over the forest floor, the Great Stag is a majestic beast, its massive, velvet-clad antlers spreading like the canopy of an ancient tree, radiating an aura of wild, untamed nature. This beautiful yet powerful creature is a peaceful sentinel of the woods, but will charge with terrifying force to protect its domain from intrusion.

Nozzle: 0.4

Layer Height: 0.08mm

Post Processing: Use thin tweezers to Pull supports down and out after cutting from the brim/base first. Be careful around the hooves, especially the connecting hoof, Antlers  as they're thinner. These just need extra care and patience.  Some smoothing (sanding etc) after the supports are removed, may be required. 

Assembly: This model comes in 3 Parts (However for simplicity I kept it to 2 parts in Studio (A and B. Where B has 2 parts) that need to be glued together. Glue Part A and both Parts of B with glue like Crazy Glue. I recommend gluing the Stag first, then the base second.

After gluing may require some miniature filler prior to painting.

Housekeeping: Make sure your printer is Calibrated, Build Plate washed and Filament Dried so the supports have the best adhesion possible. Let the miniature fully cool down before removing supports.