The minimalist YURA vase breaks away from symmetry with its angled top. The soft texture comes from the fuzzy skin setting in your slicer and gives the design an organic character. It's a design that feels both elegant and playful.

Place this vase on your side table or sideboard. The narrow opening works well with a few dried flowers or eucalyptus branches, but even without filling this vase is a striking accent in your interior. The YURA vase brings a calm yet playful feel to your space.

Dimensions: D10 x H20 cm
Print time: 6-8 hours
Resizable: yes, in your slicer
3D Model Type: shelled body
Printing technique: FDM / FFF / SLA
File type: STL
Recommended materials: PLA, PETG, ABS, ASA
Print difficulty: easy

Happy printing!

Recommended nozzle diameter and print settings

Nozzle diameter: 0.4mm, 0.6mm, or larger
Bottom and top layers: 4
Infill: 5%
Perimeters: 2
Perimeter speed range: 25-45 mm/s
Layer height range: 0.25 mm-0.4 mm
Extrusion width / wall thickness range: default
Fuzzy skin: Use a point distance of 0.3 mm and a thickness of 0.4 mm for the entire vase.
Watertight: is possible, but experimental: print hotter than usual (+10 degrees), use a low layer height (0.1-0.15mm) and slower print speed (25-30mm/s) for improved layer adhesion.

License info: PERSONAL USE ONLY.
3D printed objects of this 3D model may not be sold or used commercially in any way without an active commercial license. Thank you for your understanding.

Each model takes hours of designing, testing, and refining to get right. If you'd like to 3D print and sell this design commercially, or simply want to support my work so I can keep creating and sharing free designs, please consider joining my Patreon.

Thank you for respecting the time and effort that goes into each creation.