Summary
This is a 1:24 scale model of a workshop air compressor in a kit card style. 

Versions
The complete set is available in a 3MF file for a one-color print.
There is a 3MF-file with predefined colors intended for users of AMS or MMU.

Print
Print with 0.12 layer hight or lower to bring up the details.
No supports are needed.
Use 3 perimeters and 15% infill.

Post processing
The small struts can be removed really quickly and cleanly using a side cutter.

Assembly
The kit is easy to assemble. All parts fit together very well. If a part should be loose, superglue can be used. The wheels must be glued and won't turn.

Dimensions at 100% scale (1:24)
The fully assembled model has the following dimensions
Height: 40.6mm
Depth: 42mm
Width: 24mm

The kit card has the following dimensions when printed
Height: 23.5mm
Depth: 60mm
Width: 45mm
Scaling will work in a low range due to the tolerances. 

Other models
I will also try to publish other car related garage / diorama models. Stay tuned!

I hope you had as much fun printing and assembling it as I did :-)

Do you like my work? I would be very happy if you would support my work on Ko-fi.

Differences of the remix compared to the original

• scaled down
• adjusted tolerances
• redesigned handle
• connected in kit card style and framed
• painted for AMS / MMU