This is a cool, 3D-printed figure of Scooby-Doo, captured in a classic pose with one paw on his hip and the other raised in a friendly wave. 

Of course! Here is the detailed 3D printing technical sheet for the Scooby-Doo figure in English.

3D Printing Technical Sheet: Scooby-Doo Figure

• 3D Model: Classic Pose Scooby-Doo V1.2
• Designer: Anonymous (file found on "Mystery Machine 3D Models" forum)
• Dimensions: 150 mm (height) x 80 mm (width) x 85 mm (depth)
• Object Weight: Approx. 95 grams

Detailed Printing Parameters

• Slicing Software: PrusaSlicer v2.7.1
• Printer: Creality Ender 3 S1 Pro (optimized configuration)
• Filament:
  • Type: PLA (Polylactic Acid)
  • Brand: Generic
  • Color: "Toasted Marshmallow" brown
  • Diameter: 1.75 mm
• Printing Configuration:
  • Layer Height: 0.16 mm ("High Detail" quality)
  • Infill Density: 15%
  • Infill Pattern: Honeycomb (for a good balance of strength and weight)
  • Number of Perimeters/Wall Lines: 3
  • Support Strategy: "Tree Supports" only in necessary areas (the raised hand, neck, and base of the ears).
  • Bed Adhesion: 5 mm Brim for greater stability during printing.
• Temperatures:
  • Extruder (Nozzle) Temperature: 215°C
  • Heated Bed Temperature: 60°C
• Printing Speed:
  • General Speed: 50 mm/s
  • Initial Layer Speed: 20 mm/s (for good adhesion)
  • Support Speed: 40 mm/s
• Estimated Print Time: 6 hours, 42 minutes
• Post-processing: Support removal, light sanding on the base, and application of a thin layer of clear matte sealant to protect the filament and give it a more professional finish.