The figure is a small, demonic creature, or "imp," with green skin and large bat-like wings with reddish membranes. It has horns, a long, pointed tail, sharp claws, and glowing red eyes. Its mouth is open in a wicked grin, revealing sharp teeth.

Technical Data Sheet

• Model Name: Infernal Imp
• Designer: Arcane Minis
• Scale: 32mm (standard tabletop scale)
• Dimensions: Approximately 45mm in height (from base to horns), 60mm wingspan
• Material: High-Detail Photopolymer Resin
• File Format: .STL (pre-supported and unsupported versions included)
• Parts: Multi-part kit (1x body, 2x wings, 1x base) for optimal detail and easier printing/painting.

3D Printing Details

• Printer Type: SLA / DLP Resin Printer is recommended for the best detail.
• Layer Height: 0.05 mm (50 microns) for a smooth finish that captures fine details like muscle striations and teeth.
• Orientation: The main body should be tilted back at a 30-45 degree angle to reduce visible layer lines and minimize supports on key surfaces. The wings can be printed flat or at a slight angle.
• Supports: Heavy supports are needed under the wings, tail, and chin. Light supports should be used for the horns, fingers, and claws to prevent damage during removal.
• Post-Processing:
  • Washing: Clean the printed parts thoroughly in isopropyl alcohol (IPA) to remove uncured resin.
  • Curing: Post-cure the parts in a UV curing station for optimal strength and rigidity.
  • Finishing: Once cured, remove supports carefully. The figure can then be primed with a hobby-grade primer and hand-painted using acrylic paints. The hand-painted quality shown is a result of careful layering, shading, and highlighting to bring out the textures of the model.