tartatank
- 0.2mm layer, 2 walls, 15% infill
1-disc
PLA
Designer
4
0
Description:
For the tank competition, I decided to create something less realistic, fusing an animal—a turtle in particular—with a tank. The result is the Tartatank Model 001 (the first of its family, with others to follow, just enough time to refine some details and complete the test prints). Model 001, being the oldest of the family, requires manual ignition of the cannon using the flame at the tip of its tail.
Printing Instructions:
The support is already set up to meet the model's needs.
Assembly Instructions:
No assembly required, as the model is cast in one piece.
Post-processing:
The support comes off fairly easily and requires no special post-print cleaning.
Originality of the Model
The author declares that this work is their personally original model
This model is licensed under the following terms:
Credit must be given to the creator
Only noncommercial uses of the work are permitted
Remixes must be shared under the same license
Models(1)
- Tartatank Model 001 Elegoo.3mfDesigner
1.63 MB
2025-08-03
