I started building a small green house on my balcony recently and realized I needed a hinge to connect the frame for the lid to the rest of the green house. It is pretty small and didn't need a beefy hinge, but I also wanted something narrower. Most of the things I saw on here were more like door hinges. They didn't go very deep and were only 1 screw hole deep.

So I figured I'd play with Fusion 360 for a little while and see what I get. This is what I came up with. Dimensions are 30mm wide by about 100mm total length. It worked perfect for the narrow boards on my frame. I'm guessing I won't need all 8 screw holes to hold it in place. I could probably drop down to 2 and 2, maybe that is the next version.