Thank you all for your support. I'm always happy to hear your opinions and suggestions for new models. So please share them in the comments.

You can offer me a coffee and support my work here >>> https://ko-fi.com/drakeforge3d  If you like my work and want to support me, I appreciate any support. The website also includes a commercial license that allows you to sell all my existing models.

Step into the sneaky world of thieves and detectives with this adorable Carmelita Fox Chibi model inspired by the legendary Sly Cooper universe!

This stylized 3D printable figure transforms the fearless inspector into a cute collectible packed with charm, oversized ears, fluffy tail details, and an iconic confident pose. Perfect for fans of stealth adventures, platformer classics, and chibi-style display figures.

Designed especially for FDM printing with supports, the model keeps a clean silhouette while preserving the small character details that make Carmelita instantly recognizable. At 80 mm tall, it fits perfectly on desks, gaming shelves, or alongside other collectible miniatures.

Whether you are a retro gaming fan, painter, collector, or just love cute stylized characters, this little fox detective is ready to join your collection.

Print Information

• Height: 80 mm
• Optimized for FDM printing
• Supports required
• Great for PLA printing
• Beginner-friendly assembly-free model

Recommended Settings

• Layer height: 0.2 mm
• For extra facial and hair detail: 0.12 mm
• Use careful support removal around:
  • ears
  • braid
  • tail tip

Perfect for:

• Retro gaming fans
• Chibi collectors
• Sly Cooper inspired displays
• Shelf decorations
• Painting projects
• Cute gaming dioramas

     Guide

Each of my models is printed 2-3 times before releasing the profile. So if you have a problem with printing:

1. DRY THE FILAMENT
2. CHANGE THE NOZZLE TO A NEW ONE.

Recommendations  Guide : In case of a problem with damage to the supports, I recommend reducing the printing speed of the supports by 30-50% and the travel speed to 400mm/s. When removing the supports, I recommend first cutting off the pieces right next to the character, but not removing them, just cutting them off. Remove the remaining larger pieces and only then detach the remaining smaller pieces. This reduces the risk of damaging delicate elements.

• Please note that if you use a different filament than the recommended one, the effect may be different from my print. For example, printing in silk PLA will look better but the supports and the print itself will be more brittle and less durable.

   

   

  Recommendations:

• 
   

• 0.08-0.2. In the event of changing the original height, the height of the supports should be changed.
   

• PLA+HS, PLA+, PLA, PLA silk Recommended materials are listed in order from best to good.

   

• Clean the plate thoroughly before printing.
  Make sure the filament is dry and free from dirt. This can damage the print or weaken the support