Thank you all for your support. I'm always happy to hear your opinions and suggestions for new models. So please share them in the comments.

You can offer me a coffee and support my work here >>> https://ko-fi.com/drakeforge3d  If you like my work and want to support me, I appreciate any support. The website also includes a commercial license that allows you to sell all my existing models.

Meet Prince, the smallest king of confidence ever hatched from a mountain of stolen gold coins. 
This charming little dragon may fit in the palm of your hand, but in his mind he already rules seven kingdoms, three volcanoes, and at least one suspiciously shiny cave.

Prince is a highly detailed chibi-style dragon model designed for FDM 3D printing with supports. His oversized head, smug expression, curled tail, tiny wings, and proud stance give him a bold fantasy personality while staying clean and printable.

And yes... that tiny scar on his right cheek?
Prince insists it came from an “epic battle against a legendary beast.”
Most people suspect he simply tripped over his treasure chest. Either way, he wears it like royal jewelry. Nothing could possibly improve perfection... except maybe more gold.

This talkative little dragon adores attention almost as much as he loves his hoard. He will happily judge your other miniatures from the shelf while pretending they are his loyal subjects. Perfect for fantasy collectors, dragon lovers, tabletop decorations, or anyone who enjoys expressive chibi creatures with attitude.

The model is optimized for FDM printing, with clean forms and balanced details that print beautifully at small or medium display sizes. Supports are recommended for the wings, chin, and tail areas to achieve the best final result.

Prince is not just a dragon.
He is a one-dragon parade of ego, charm, sarcasm, and treasure-polishing excellence.

     Guide

Each of my models is printed 2-3 times before releasing the profile. So if you have a problem with printing:

1. DRY THE FILAMENT
2. CHANGE THE NOZZLE TO A NEW ONE.

Recommendations  Guide : In case of a problem with damage to the supports, I recommend reducing the printing speed of the supports by 30-50% and the travel speed to 400mm/s. When removing the supports, I recommend first cutting off the pieces right next to the character, but not removing them, just cutting them off. Remove the remaining larger pieces and only then detach the remaining smaller pieces. This reduces the risk of damaging delicate elements.

• Please note that if you use a different filament than the recommended one, the effect may be different from my print. For example, printing in silk PLA will look better but the supports and the print itself will be more brittle and less durable.

   

   

  Recommendations:

• 
   

• 0.08-0.2. In the event of changing the original height, the height of the supports should be changed.
   

• PLA+HS, PLA+, PLA, PLA silk Recommended materials are listed in order from best to good.

   

• Clean the plate thoroughly before printing.
  Make sure the filament is dry and free from dirt. This can damage the print or weaken the support