Meme Cat with a Knife – "Say That Again" (Double-sided, Multicolor)

A hilarious, double-sided keychain featuring the aggressive yet adorable meme cat holding a knife, accompanied by the bold text: "SAY THAT AGAIN". The perfect accessory for your keys, backpack, or as a funny gift for anyone who shouldn't be messed with before their morning coffee!

Model Features:

• Double-sided design: The motif is perfectly mirrored and clearly visible from both sides of the keychain.

• Compact size: Diameter is precisely 40 mm – compact, slick, and ideal for daily carry.

• Optimal thickness: Just 2 mm, making the keychain lightweight yet sufficiently durable and rigid.

Recommended Print Settings:

To achieve the best results and sharp details (especially for the small text and the cat's fine outlines), I highly recommend using the following settings in your slicer:

• Layer height: 0.2 mm

• Wall generator: ARACHNE

• ⚠ IMPORTANT: Due to the very fine text and small details (like the cat's whiskers and eyes), it is crucial to switch the wall generator to Arachne in your slicer. The Classic generator might skip some of these fine lines or leave gaps inside the lettering.

• Infill: 15% - 100% (at 2mm thickness, a higher infill or solid layers will give it a nice weight).

• Material: PLA (Colors used: White background, Black outlines/text, Red for the knife handle).

💡 Nozzle Tip:

This model was sliced and tested with a standard 0.4 mm nozzle. Given the tiny size of the details and lettering, it would be even more ideal to print this with a 0.2 mm nozzle if you have one available (I unfortunately didn't have one on hand at the moment). However, as you can see, even with a standard 0.4 mm nozzle and the Arachne wall generator, the print turned out highly successful and the details are nice and crisp!

Available Files:

• 3MF File: Pre-colored and ready to print for multi-material systems (Bambu Lab AMS, Anycubic ACE, etc.).

• STL File: Raw model for general use – you will need to set up the color changes manually by layer height or paint it in your slicer.

If you like this angry little cat, please don't forget to upload your prints (Makes) and leave a rating! Happy printing!