🇬🇧 Description

This model has been designed to allow the use of the CANVAS system on the Centauri Carbon 1, while keeping the printer fully enclosed using the original top glass.

The riser lifts the lid to provide clearance for the PTFE tubes without any interference, while maintaining a clean and functional integration with the printer.

👉 No additional hardware is required for assembly.
The design now allows you to install from 1 up to 3 plexiglass panels (front, left, and rear), depending on your needs.
If you prefer not to use plexiglass, printed parts can be used instead.

🆕 V2 Improvements

This version includes several upgrades:

• Possibility to install plexiglass on the rear and left sides
• Larger front opening with rounded corners for a cleaner look
• Plexiglass panels can now be inserted from the top after assembly
• All plexiglass slots are designed at 215 mm, making them compatible with A4 sheets
• All parts are fully compatible, allowing you to mix and match and create your own setup

🧩 Plexiglass (recommended)

This model is designed to use 3 mm thick acrylic (plexiglass) sheets, in A4 format.

👉 Only one cut is required:
215 mm height (width is already compatible)

This makes preparation quick and easy, even with basic tools.

To make things easier, here are links to the type of sheet used:

🇧🇪 Belgium 👉 https://amzn.to/4vY963k
🇫🇷 France 👉 https://amzn.to/4w2E4Yu
🇩🇪 Germany 👉 https://amzn.to/3QSd1Pf
🇺🇸 USA 👉 https://www.amazon.com/dp/B0FBW87GB8?ref_=chk_typ_imgToDp&th=1
🇬🇧 UK 👉 https://www.amazon.co.uk/Pack-Clear-Acrylic-Sheets-Transparent/dp/B0CRPFR462/

🧩 Design & Printing

The design has been optimized to be:

• Easy to print
• Strong and durable (important given the height of ~27.4 cm)
• Optimized to require minimal supports

The files are also designed to be:
👉 Easy to print, even on standard machines

This strength comes with higher material usage (over 2 kg of filament).

👉 Recommended material: PETG
(better heat resistance than standard PLA in an enclosed environment)

🔧 Assembly

The model consists of:

• 16 parts to assemble
• + optional parts depending on your plexiglass configuration

Recommended method:
👉 Assemble the bottom parts directly on the printer
👉 Then add the upper parts on top

Alternative:
You can assemble everything off the printer by adding:
👉 a small amount of super glue in the assembly grooves

This helps hold everything in place and reinforces the overall structure

👉 Edit: For those who already own a ventilated riser, there’s no need to discard it. You can simply place it on top of this model to keep that feature.

💡 Notes

• No screws or additional hardware required
• Designed to be practical, accessible, and modular
• Compatible with multiple configurations (0 to 3 plexiglass panels)
• Allows you to keep your printer enclosed even with the CANVAS system installed

🎨 CANVAS System

If you are interested in the CANVAS system, you can find it here:

🇪🇺 Europe – €45 👉 https://tidd.ly/4eIlRJc
🇫🇷 France 👉 https://tidd.ly/4tzBMy6
🇬🇧 UK – £38 👉 https://tidd.ly/4vUh0e7
🇺🇸 USA – $55 👉 https://tidd.ly/4vTkSfq