This is a storage tray designed for the Philips LatteGo 5400 model (may fit other models but not tested). The tray sits on top of the bean storage container. Has handles on the sides for an easy way to lift off when needed to access the bean container. Also does not impede using the grounded coffee slot at the front as well. The tray comes in two options: First is a Single body , which will print all at once adn will require a lot of support material , but no assembly is required. Second is in 5 parts, the tray is printed by itself and the legs are printed separately. The fitting of the legs is designed to be tight (0.1mm clearance) Each leg is marked with dots that correspond the the number of dots on the tray of which leg goes where. Make sure your printer is calibrated well or you will have trouble assembling this or will need to file/sand or scale down the parts to fit better.