GIF
holder
organizer
organization
mount
diy
glue
gun
pegboard
- 0.2mm layer, 2 walls, 15% infill
1-disc
PETG
Designer
6
0
Design Concept
This Hot Glue Gun PegBoard Holder is a remix Hasen3D. A nice way to store your tool and includes a drip tray.
Purpose
I have a custom DIY made Pegboard for my work desk and the holes on the board have have non-uniform holes over the whole wall. While measuring I found that the closest I can get is some holes are separated 25mm apart from each other if measuring from the middle of the hole. I made a bunch of different holders for tools I have. All of the uploaded holders are made for holes that fit only boards that are at least 5.2mm in hole size and 25mm apart from each holes center.
Printing Suggestions
Best for strength is to print at least with PETG. Supports are required for the main body.
Assembly Instructions
Remove the supports and the pegboard can be mounted in the slots.
Attribution goes to Hasen3D on Printables for the original design.
Originality of the Model
The author declares that this work is their personally original model
This model is licensed under the following terms:
Credit must be given to the creator
Only noncommercial uses of the work are permitted
Remixes must be shared under the same license
Models(2)
- hotglue-pebgoard elegoo.3mfDesigner
185.35 KB
2026-03-11
hotglueholderquarter-pegboard.stlDesigner597.05 KB
2026-03-11
