NOTE: This model has only been confirmed to work with the following:

• Voice Remote Pro, 1st Edition (sold with the Roku Ultra 2022, model number 4802R)
• Voice Remote (sold with the Roku Streaming Stick 4K, model number 3820R)

Compatibility with other Roku remotes is not guaranteed.

Somebody asked me to make this in the comments of my Roku Channel Blockers, so I did my best to whip something up!

Requires less than 0.3 grams of filament, prints in under two minutes. The small arrow serves two functions: it gives you a little nub to stick your nail under, and it points UP when you've pushed it onto the power button correctly.

ADVANTAGES:

• Print in minutes
• Requires virtually no filament
• Simply push onto the power button - unscrewing or modding the remote not required
• Sturdy, won't easily fall out of place

DISADVANTAGES:

• Won't easily fall out of place, but can still fly off the button if you smack or drop the remote too hard
• If you twist it enough, it's still possible to press in the power button (this has never happened to me accidentally)
• Adds about 1.5mm extra height to the front of the remote
• A bit finicky to get on, since the power button is at a slight angle and doesn't stick out much at the top

You might also like my Roku Channel Blockers!