refill
lighter
torch
butane
refuel
- 0.2mm layer, 4 walls, 30% infill
1-disc
PLA
Designer
11
1
Lighters don't have a refill valve that is the right size. This is really annoying because then you need an adapter to fill your lighter. I tried out a bunch of different ones out there and I found that most of them did not work. So I did the only logical thing a person with a 3d printer would and I made my own.
This was a really easy print, just make sure you use mouse ear brim so that it adheres to the build plate but the brim comes off nice. Also I recommend finer layers so that the butane has a harder time going through the gaps between the layers. The butane is really cold when it comes out and it hurts to get it on your hands.
Version 2.0 is out! Here is a link:
https://**********.com/en/models/1646987-butane-lighter-refill-adapter-2-0#profileId-1740748
Originality of the Model
The author declares that this work is their personally original model
This model is licensed under the following terms:
This work is licensed under a Standard Digital File License. Digital files have a strict non-commercial, personal use only license.
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital file or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including remixes of this object). You can not host these files on other digital platforms, web stores or cloud repositories. The objects may not be used in any way whatsoever in which you charge money, collect fees.
Models(1)
- butane-adapter-v7.3mfDesigner
1.26 MB
2025-11-08
