Have you ever clung to the headphone holders on your desks?That won't happen with this model because you can hide it in one motion and take it out the same way.
mounting on screws or double-sided tape
Modeled to print 1 part on an FDM printer without supports in a vertical position
Print settings
Slicer: Creality print
Plastic: Hyper PLA
Layer height: 0.20
Line wight: 0.42
Wall lines: 2
Filling: 15%
Temp nozzle: 220°
Temp bed: 55-60°+ glue(If you use a
bed with a rough
surface, set the temperature to
60.)
Print Speed: 300.00
Infill Speed: 300.00
Outer Wall Speed: 210.00
Inner Wall Speed: 240.00
Top Surface Skin Speed: 210.00
Top/Bottom Speed: 210.00
Cooling:off
Ironing: on