The ALINE vase features a spherical design with a playful touch through the rounded ears on the side of the neck. This shape gives the vase an elegant appearance that stands out and catches your eye. The soft curves create an elegant look that works beautifully in different interiors.

Place this vase on your side table or sideboard where the playful form stands out. The narrow opening works beautifully with a single eucalyptus branch or some dried flowers. The ALINE vase brings an elegant, warm atmosphere to your space.

For a softer look, you can enable the fuzzy skin setting in your slicer.

Dimensions: D13.4 x H20 cm
Resizable: yes, in your slicer
3D Model Type: shelled body
Printing technique: FDM / FFF / SLA
File type: STL
Recommended materials: PLA, PETG, ABS, ASA
Print difficulty: easy

Happy printing!

Recommended nozzle diameter and print settings

Nozzle diameter: 0.4mm, 0.6mm, or larger
Bottom and top layers: 4
Infill: 5%
Perimeters: 2
Perimeter speed range: 25-45 mm/s
Layer height range: 0.25 mm-0.4 mm
Extrusion width / wall thickness range: default
Watertight: is possible, but experimental: print hotter than usual (+10 degrees), use a low layer height (0.1-0.15mm) and slower print speed (25-30mm/s) for improved layer adhesion.

License info: PERSONAL USE ONLY

3D printed objects of this 3D model may not be sold or used commercially in any way without an active commercial license. Thank you for your understanding.

Each model takes hours of designing, testing, and refining to get right. If you'd like to 3D print and sell this design commercially, or simply want to support my work so I can keep creating and sharing free designs, please consider joining my Patreon.

Thank you for respecting the time and effort that goes into each creation.