Su-47
Fighter jet
Tianmen Project
- Layer height: 0.12 mm, wall thickness: 2 layers, infill density: 15%
3-disc
PLA
Designer
73
23
Su-47 – Assembly Kit
(Cockpit, wings, canard wings, landing gear, and weapon bays are all movable; the wings can be flipped backward to alter the aircraft’s configuration)
PLA, layer height of 0.12 mm, 2-wall shell, acceleration set to 1000 or lower across the board, with a print speed of 80 for smaller components.
The model uses 46 grams of material and takes 6 hours and 23 minutes to print.
Due to material shrinkage and printing accuracy, it may be necessary to lightly sand and apply adhesive, applying gentle pressure to ensure proper bonding.
Before printing, be sure to clean the PEI print bed thoroughly, ensuring optimal adhesion and verifying that the material is completely dry.
Originality of the Model
The author declares that this work is their personally original model
This model is licensed under the following terms:
This work is licensed under a Standard Digital File License. Digital files have a strict non-commercial, personal use only license.
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital file or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including remixes of this object). You can not host these files on other digital platforms, web stores or cloud repositories. The objects may not be used in any way whatsoever in which you charge money, collect fees.
Models(1)
- SU47.3mfDesigner
8.82 MB
2025-10-12
