GIF
Hellokitty
Crescent shape
Happy Mid-Autumn Festival!
0.2 mm layer height, 2-wall structure, 8% infill density
2-disc
PLA
Designer- 0.08 mm layer height, 2-wall structure, 15% infill density
4-disc
PLA
Designer
17
6
Hellokitty – Crescent Moon Boat: Happy Mid-Autumn Festival!
The kit requires assembly using glue. The head, body, nose, eyes, decorative elements, and boat are all printed in separate parts, with connecting posts on the head and body.
Assembly is straightforward—simply follow the instructions in the main image. Due to material shrinkage and printing accuracy, you may need to lightly sand the parts and apply a bit of glue, then gently press them into place with moderate force.
PLA, with 2-wall infill, acceleration set to 1000 or lower across the board, and a print speed of 80 for small components.
The model uses over 50 grams of material (Hellokitty)—the rocking boat weighs 145 grams—and takes approximately 4 hours plus 3 hours and 33 minutes to print.
Before printing, be sure to thoroughly clean the build plate, ensuring optimal adhesion and verifying that the material is completely dry.
Originality of the Model
The author declares that this work is their personally original model
This model is licensed under the following terms:
This work is licensed under a Standard Digital File License. Digital files have a strict non-commercial, personal use only license.
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital file or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including remixes of this object). You can not host these files on other digital platforms, web stores or cloud repositories. The objects may not be used in any way whatsoever in which you charge money, collect fees.
Models(2)
- Hellokitty.3mfDesigner
11.22 MB
2025-10-05
- 弯月船.3mfDesigner
4.33 MB
2025-10-05
