The refrigerator sticker is approximately 10 cm tall.

The height of the refrigerator sticker is about 10 cm.

During the design phase, I incorporated intentional gaps between the parts, making assembly straightforward—though you’ll want to have some adhesive handy.

When I designed the model, I left sufficient clearance between the components, ensuring easy assembly—but don’t forget to prepare some glue for securing the pieces.

The magnet mounting slots I’ve预留ed are 10.2 mm in diameter, so only magnets with a diameter of 10 mm or less can be securely attached.

The magnet installation positions I’ve reserved are 10.2 mm in diameter, meaning only magnets with a diameter under 10 mm will fit properly.

I’ve included multiple magnet mounting slots to accommodate varying magnetic properties across different refrigerator surfaces—though in most cases, a single 10 mm magnet is perfectly adequate.

If your refrigerator surface is flat, a 1 mm thick magnet will work well; however, if the surface has a slight curve, I recommend using a 1.5 mm thick magnet for better adhesion.

For optimal performance, consider purchasing soft magnetic stickers with 3M adhesive backing, like the one shown in the image.

Buying a soft magnetic sticker with 3M adhesive backing, such as the one illustrated here, will deliver superior results.

If you’re pleased with the model, please take a moment to give it a free “like” and save it to your favorites—your support means a great deal to us!
If you are satisfied with the model, please give a free like and collect, thank you very much!