This is a cool 3D-printed figure of a bat warlock with a charming cartoon style. The character is dressed in a cape, a wizard's hat topped with a skull, and holds a staff with a skull at the end. The figure has a friendly pose, giving a thumbs-up, and its black and white finish gives it a simple, elegant, almost three-dimensional sketch-like appearance.

3D Printing Technical Sheet: The Bat Warlock

• 3D Model: The "Grayscale" Bat Warlock
• Designer: Uncredited digital artist (model likely from a 3D model repository or miniature creator)
• Dimensions: Approximately 150 mm (height) x 100 mm (width) x 80 mm (depth)
• Object Weight: Approx. 90 grams

Printing Parameters and Post-processing

• Slicing Software: PrusaSlicer (with MMU configuration)
• Printer: Fused Deposition Modeling (FDM) 3D Printer with multi-material capability (e.g., Prusa i3 MK3S+ with MMU2S)
• Filament:
  • Type: PLA (Polylactic Acid)
  • Colors: Black and White (for the body, cape, hat, and skull)
• Printing Configuration:
  • Layer Height: 0.16 mm (standard quality for a good balance of detail and speed)
  • Infill Density: 12%
  • Infill Pattern: Gyroid
  • Supports: Tree supports, optimized for the staff, hat, and wings.
  • Multi-material Configuration: A multi-material unit was used to automatically switch between the black and white filaments on the necessary layers.
• Estimated Print Time: 8 hours, 45 minutes (the filament changes increase the total print time)
• Post-processing and Finishing:
  • Support Removal: Careful manual removal of the supports.
  • Cleaning: Removal of any strings or filament residue.
  • Final Finish: A clear matte sealant can be applied to protect the filament and give it a uniform finish.