A suspended heart string lamp in a delicate and modern design. An anatomically correct (I hope, if not let me know lol) heart suspended by thin string-like supports, creating the illusion of floating light. 

Perfect as a decorative piece for doctor office's, cardiologists, bedrooms, living rooms, or romantic settings, it blends minimalist geometry with warm ambient glow. Its lightweight form makes it ideal for 3D printing or as a unique accent in interior design projects.

Credit:
The model was originally made by neshallads, a big thanks to him :). It has been modified with extra details and changed geometry so that it ensures support free print-ability.
"Realistic Human Heart" (https://skfb.ly/oyBCT) by neshallads is licensed under Creative Commons Attribution

 (http://creativecommons.org/licenses/by/4.0/).

Assembly

Do not use cold plates or excessive glue, taking the print off may damage the strings. Most models with strings only use a single 0.24 layer high string, I use two. That way, if one fails, the other usually does not. The visual is pretty much the same.

To light it you will need the standard 3AAA RGBW pucks, either from Aliexpress or bambu lab. 

Here is a link from a seller I used before, you get 3 pucks for a euro

- Search “rgbw pucks aaa” on aliexpress and pick the best deal for you. It shouldnt cost more than a euro each


Relatively simple, assemble the two halves using an assembly jig in the profile, it is basically two rings that will fit exactly to the two halves, just make sure you put a paper down so the glue doesn't leak and ruin your table (ask me how I know). There are nubs in the provided bases and it will keep it in place for a desktop stand, but carrying it around without gluing it, is not advised… if you are happy with it and do not wish to reuse the base for my other models, go ahead and glue it.


Also, DO NOT change layer size because then the mid air strings may fail.  Any issues, let me know.