multicolor
Pokemon
Meowth
Pixel Art
filamentchange
atlayerchange
- 0.2mm layer, 2 walls, 15% infill
1-disc
PLA
Designer
6
3
Meowth, Pixel Art, 3 filament changes
With 3 filament changes for a total of 4 different colors
This print must to be slice with "Initial Layer Height" and "Layer Height" = 0.20 mm (unless there is a change in scale)
Except change of scale and/or layer height befor slicing.
You need to add 3 "filament change" (g-code "M600") or "pause" (g-code "M0") depending on your printer/firmware to change filament.
A change of filament every two layers.
Start with : White filament until Z0.40
Switch to : Violet until Z0.80
Switch to : Darker violet filament until Z1.20
Switch to : Black filament until Z1.60, the end of the print.
Filament used : PLA White EcoFil, PLA ECO Violet ArianePlast, PLA Pantone "Interstellar Violet" Anycubic, PLA+ Noir ArianePlast.
Credits :
- "Pixel Art Image" extracted from image found on "https://www.spriters-resource.com/game_boy_gbc/pocketmonstersgogogobootleg/sheet/8904/"
Happy printing.
Originality of the Model
The author declares that this work is their personally original model
This model is licensed under the following terms:
Credit must be given to the creator
Only noncommercial uses of the work are permitted
Remixes must be shared under the same license
Models(2)
4c Meowth - Game Boy GBC - Pocket Monsters Go Go Go Bootleg - General Sprites.stlDesigner
425.47 KB
2025-08-25
- ES1182_Meowth - Game Boy GBC - Pocket Monsters Go Go Go Bootleg - General Sprite.3mfDesigner
125.31 KB
2025-08-25
