This model was created by me on MakerWorld. Please don't report me. Here is the link: The Link

This is my roller coaster model.

Please read all of this. There is important information.

It includes the basic pieces of track and a super cool car. More track pieces are coming!

Car instructions:

First, gather these pieces: 

The 2 pieces on the top right are the ones with the smaller circular bottom and longer stick.

Then, attach the rods to the wheels:

Then, put the rod & wheel without the circular disc into the middle of the leg:

Then, put the other two  rods in the other two holes:

Repeat this 4 times with the remaining pieces.

Now you need the cart.

Add the leg to the cart like this:

Now, you need the remaining pieces:

Attach the cross to both arms:

Last, attach the caps like this:

Assemble the loop by putting with protruding rectangles with the concave rectangles; if it doesn’t fit, then try a different piece. Assemble them in the order shown in the photo in the print profile.

For the dive, just put straight pieces into the concave end and the protruding end of the curve. The two pieces on the second plate are for a supporting pole.

Please print!