Doom Logo HueForge
Print Profile(1)
- 0.08mm layer, 2 walls, 15% infill
1-disc
PLA
Designer
16
4
Released 2025-08-12
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Swap Instructions: Start with Black At layer #7 (0.64mm) swap to Gray At layer #9 (0.8mm) swap to Orange At layer #17 (1.44mm) swap to Yellow for the rest.
Originality of the Model
The author declares that this work is their personally original model
This model is licensed under the following terms:
Credit must be given to the creator
Models(2)
- Doom_Front_200x122.3mfDesigner
12.15 MB
2025-08-10
Doom_Front_200x122.stlDesigner58.63 MB
2025-08-10
No more
