Fantasy House - Print-Ready Miniature by Mike Gyver Minis! ⚔️🎲

Bring your tabletop village to life with this charming Fantasy House, featuring a detailed stone-brick facade, a rustic hanging lantern, and a quaint potted tree. This highly detailed terrain piece serves as the perfect centerpiece for any bustling medieval street or quiet forest hamlet.

Part of my project is building high-quality, print-ready D&D (and other TTRPG) miniatures, perfect for your campaigns! 🐉

⚔️ Expand Your set 

Looking for the Blighted Fantasy House to match this model? 

I archive all the variants, class archetypes, elite and command units from this set exclusively on Patreon. 

👉 Unlock the full collection, 1 to 1 Print Support & Commercial License here: https://www.patreon.com/MikeGyverMinis

⭐ Why Mike Gyver Minis? ⭐

🏅 Real World Printing: I only showcase the real prints. What you see is what you get.

🎨 Designed for Printability: Sculpted and optimized for successful prints on common 3D printers.

🔬 Rigorously Tested: Printed successfully multiple times on Bambu Lab X1C/P2S.

⚙️ Ready-to-Print Files: Includes tuned .3mf project file!

• For Bambu Studio / OrcaSlicer / Prusaslicer (..._FDMConfig.3mf)

⚠️ LICENSE: PERSONAL USE ONLY ⚠️ This file is the intellectual property of Mike Gyver Minis.

• You may: Print this file for yourself, your friends, or for gaming sessions.
• You may NOT: Sell the physical prints, sell the digital files, or distribute the files.

Want to sell these prints? Join the Merchant Tier on my Patreon! 

Merchants get:

✅ Commercial License to sell physical prints legally.

✅ Bambu Lab Optimized Files (Pre-supported & Tested).

✅ Access to the full Miniature and Decor Collection (Elites, Class Archetypes & Bosses).

➡️ Get your Commercial License here: https://www.patreon.com/MikeGyverMinis

Explore All My Free Model Sites: ➡️ https://linktr.ee/mikegyverminis 

Spend less time troubleshooting, more time playing! 🎉

🛠️ Print Settings & Advice 🛠️

• Printer Used for Testing: Bambu Lab X1C / P2S
• Supports: Yes - Use the included .3mf file for your slicer! (Recommended!)
• Layer Height: 0.08mm
• Infill: 10% Cross Hatch
• Filament: Bambu PLA Basic Blue Grey

🔥 Important Printing Advice:

1. Prep Matters! 🔑: A Calibrated printer, Clean build plate (🧼 soap & water!), and Dry filament are essential.
2. Support Removal:
   • Use tweezers/cutters ✂️ carefully.
   • Minor cleanup (light sanding) where supports touch is normal. ✨
   • Supports are quite easy to remove, however when you get to the Tree and Lantern, go slow. Take your time, using flush cutters and very thin tweezers. Start at the top snipping the small bits and working your way to larger trees. Some trees may need multiple snips.
      

⚙️ .3mf File Info (Please Read!):

• This download includes a tuned project file:
  1. ..._FDMConfig.3mf: For Bambu Studio, OrcaSlicer, & PrusaSlicer.