This is a scale model designed to be 1:20 of the famous Kenworth W900. I designed this truck with Inventor using photos of the original truck and some basic blueprints i found on google. I modeled this truck in my spare time wile i was working for Paccar (Kenworth an Peterbilt), as an intern. All the parts can be printed and assembled with screws and crazy glue from local hardware store. I made some cutomizable parts like different suvisors, differents exaust, different rear fenders and an optionnal low-roof bed. Please feel free to ask any question. Also, if you find this model interesting, feel free to leave tips everything is apreciated as a student!

Things needed for assembly:

• About 100 #5 wood screws cutted to length with cutters (Canadian Tire)
• Crazy glue for Marker lite, front grill and mirrors
• Screwdriver
• 2x Small hinges 3/4'' wide (Canadian Tire)

Things to print with quantity:

• 1x Cab
• 1x Hood
• 1x Grill
• 1x Front bumper
• 1x Rear bumper
• 1x Fifth wheel
• 1x Front axle
• 2x Rear axle
• 5x Cross member
• 8x Rear wheel
• 2x Front wheel
• 10x Tire
• 5x Marker lite
• 1x Air filter
• 1x Air filter MIRRORED
• 1x Footstep
• 1x Footstep MIRRORED
• 2x Fuel tank
• 2x Washers (Used for exhaust assembly)
• 1x Exhaust (any type)
• 1x Exhaust (any type) MIRRORED
• 1x Front frame rail
• 1x Front frame rail MIRRORED
• 1x Rear frame rail
• 1x Rear frame rail MIRRORED
• 2x Fender
• 1x Mirror
• 1x Mirror MIRRORED

For bed option you will need to print:

• 1x Bed
• Replace Front frame rail for Front frame rail for bed option
• Replace Front frame rail MIRRORED for Front frame rail for bed option MIRRORED

All Stl parts are placed as i printed them so you should be good.