model engine
engine
model
Radial Engine
48
2
You will need:
1 metal shaft that is 4.5 mm thick that can be used for the propeller, Super glue and hobby paint if you want to paint the engine and 4 m4 bolts that is 10 mm long for the stand.
The card that is on the engine stand can be designed as you wish. For example, if you want to add text with facts about radial engines or put on an image on it.
You can of course make it more detailed with cables from the spark plugs or paint the engine dusty so it looks older.
Originality of the Model
The author declares that this work is their personally shared model
This model is licensed under the following terms:
Credit must be given to the creator
Models(13)
Cylinder_Bottom_Half.stl
1.13 MB
2025-07-01
- Cylinder_Top_Half.stl
900.77 KB
2025-07-01
- Engine_Block_Bottom_Half.stl
1.53 MB
2025-07-01
- Engine_Block_Top_Half.stl
551.64 KB
2025-07-01
- Exhaust_Pipe_Part_1.stl
925.96 KB
2025-07-01
- Exhaust_Pipe_Part_2.stl
376.06 KB
2025-07-01
- Exhaust_Pipe_Part_3.stl
44.81 KB
2025-07-01
- Propeller_Blades.stl
750.38 KB
2025-07-01
- Shaft_End.stl
98.42 KB
2025-07-01
- Pushrods.stl
373.52 KB
2025-07-01
- Stand_For_Engine_Part_1.stl
122.93 KB
2025-07-01
- Stand_For_Engine_Part_3.stl
1.06 KB
2025-07-01
- Stand_For_Engine_Part_2.stl
308.48 KB
2025-07-01
View all(13)
