A nice and simple way to use up some of that purge waste and just an hour long print for single colour.

Smooth handled poop maraca - a toy filled with purge waste or purge poops with a simple smooth handle.

As simple as this is there are some notes:

1. A pause is configured near the top of the print to allow you to add your purge poops.
2. You will want to use purge poops or waste that is dense for better sound.
3. Even normal purge poops you will want to snip to avoid too soft of a sound - see images below
4. Profile is configured with a dual colour option and a multicolour option.
   1. The multi-colour option allows you to change colours for each stripe if you want to.

Print Time:

• Single Colour - 1 hour
  • Pause around 53 minutes to add purge waste
• Striped - 2 Colour - 2 hours and 7 minutes
  • Pause around 1 hours and 54 minutes to add purge waste

Purges to AVOID or snip for best results:

Good purge poop examples:

Print Settings:

• 0.2mm standard Bambu profile
• 15% infill
• Classic generator
• Slowed overhangs and bridges