PS5
LED
LIGHTBOX
LED LAMPS
NIGHT LIGHT
ASTROBOT
LIGHTS
LED LIGHTBOX
13
0
Astrobot - Printing Instructions Included
All the necessary printing instructions are included in the file.
If you have any questions, feel free to DM me!
You will need a 1mm thick glass layer or any transparent material of your choice.
Also, make sure to have a strip light of your choice for the lighting.
For Commercial Use & More : https://www.patreon.com/c/ACSPARK3D
Enjoy showcasing your Astrobot Lightbox!
Note to always put the transparent layer last
LightBox Frame Settings:
Layer Height: 0.2
Walls: 2
Bottom: 2 (Or 3 to hide infill lines)
Top: 2
15% Infill
LightBox Back Plate Settings:
Layer Height: 0.2
Walls: 2
Bottom: 3
Top: 3
10% Infill
LightBox Transparent Layer:
Layer Height: 0.2
Walls: 2
Bottom: 2
Top: 2
1% Infill
Design Layer Settings:
Layer Height: 0.2
2 Walls
2 Top/Bottom
3% Infill
No supports.
Bill of materials
- NameQuantityNotes
- 11X 3MM LED RFB LIGHTS1STRIP LIGHTS
Originality of the Model
The author declares that this work is their personally original model
This model is licensed under the following terms:
Credit must be given to the creator
Only noncommercial uses of the work are permitted
Models(7)
obj_3_Astrobot Silk Blue.stlDesigner
229.18 KB
2026-02-02
obj_4_Astrobot White.stlDesigner221.96 KB
2026-02-02
obj_5_White backround layer (Last).stlDesigner1.06 KB
2026-02-02
obj_1_LightBox Frame V1.stlDesigner3.21 KB
2026-02-02
- obj_1_Astrobot Black 1.stlDesigner
256.33 KB
2026-02-02
- obj_1_LightBox Back Plate.stlDesigner
7.50 KB
2026-02-02
- obj_2_Astrobot Dark Blue.stlDesigner
176.45 KB
2026-02-02
View all(7)
