Carry the Way of the Mandalore wherever you go! This helmet keychain isn't just an iconic accessory; it's a perfect project to test your printer's precision and build-plate management.

🛠️ Model Features

The helmet has been optimized to preserve the show's signature details even at a small scale. The surface texture highlights the "industrial" feel of 3D printing, reminiscent of raw Beskar steel.

💡 Printing Pro-Tip: Two Colors, One Build Plate!

The best part about this model? You can achieve a clean two-tone look (Silver/Grey for the helmet and Black for the visor) .

To get the cleanest finish and maximum efficiency, I recommend using the "Print By Object" feature.

How to set it up in your slicer:

1. Place both components (Helmet and Visor) on the build plate.

2. Ensure there is enough clearance between them so the toolhead doesn't collide with the finished part.

3. Navigate to the menu: OTHERS > SPECIAL MODE.

4. Select: Print By Object from the dropdown menu.

Technical Note: In this mode, the printer fully completes the first object before moving to the second. This drastically cuts down on travel time and completely eliminates stringing between colors, giving you a professional, clean result.

⚙️ Recommended Settings

• Material: PLA or PETG (Silver/Grey and Black).

• Layer Height: 0.12mm or 0.16mm for smoother curves on the dome.

• Infill: 15-20% (Gyroid recommended for strength).

• Supports: Not strictly necessary if your cooling is dialed in, but you can add minimal supports for the visor arch.

Show off your makes! If you print one, please upload a photo—I’d love to see your versions in Beskar!