Model Details This design includes a single STL file. If you need a matching handle for the opposite side, simply mirror the model in your slicing software before printing. Please note that these handles are quite long, meaning they will require a large format printer to accommodate their length on the build plate. Hardware Required The mounting holes are designed for standard 3x12mm wood screws. Ensure your screw heads are measured at 6mm in width to fit the recessed screw holes perfectly. Recommended Print Settings For the best visual quality, orient the model with the leaf pattern face down on your build plate. This orientation requires supports, but you can achieve an incredibly clean finish by printing with PETG filament and setting up a dedicated PLA interface layer for the supports. The two materials will not fuse together, allowing the support structures to release easily from the detailed surface.