Thank you all for your support. I'm always happy to hear your opinions and suggestions for new models. So please share them in the comments.

You can offer me a coffee and support my work here >>> https://ko-fi.com/drakeforge3d  If you like my work and want to support me, I appreciate any support. The website also includes a commercial license that allows you to sell all my existing models.

Blessed by the Abyss – Ooze Paladin

This unique female Ooze Paladin statue blends holy warrior aesthetics with an otherworldly slime form, creating a striking fantasy centerpiece inspired by RPG and Dungeons & Dragons themes. The character stands in a confident battle-ready pose, wielding a sword and shield while her body partially melts into a viscous, flowing ooze.

The sculpt features a strong contrast between solid paladin armor and organic slime textures, with dripping forms around the legs, shield edges, and base, giving the impression that the paladin is emerging from or returning to a living mass of magical ooze. Fine details such as facial features, armor plates, emblems, and fluid transitions enhance the visual depth and fantasy storytelling.

With a height of approximately 110 mm, this model is designed as a larger decorative statue, ideal for desks, tables, shelves, or display cabinets. Due to the complex geometry, flowing slime shapes, weapon angles, and overhangs, supports are required during FDM printing to ensure clean results and preserve delicate details.

Perfect for fantasy collectors, tabletop RPG fans, painters, and anyone looking for a bold and unusual paladin interpretation that stands out as a display piece rather than a standard miniature.

     Guide

Each of my models is printed 2-3 times before releasing the profile. So if you have a problem with printing:

1. DRY THE FILAMENT
2. CHANGE THE NOZZLE TO A NEW ONE.

Recommendations  Guide : In case of a problem with damage to the supports, I recommend reducing the printing speed of the supports by 30-50% and the travel speed to 400mm/s. When removing the supports, I recommend first cutting off the pieces right next to the character, but not removing them, just cutting them off. Remove the remaining larger pieces and only then detach the remaining smaller pieces. This reduces the risk of damaging delicate elements.

• Please note that if you use a different filament than the recommended one, the effect may be different from my print. For example, printing in silk PLA will look better but the supports and the print itself will be more brittle and less durable.

   

   

  Recommendations:

• 
   
• 0.08-0.2. In the event of changing the original height, the height of the supports should be changed.
   

• PLA+HS, PLA+, PLA, PLA silk Recommended materials are listed in order from best to good.

   

• Clean the plate thoroughly before printing.
  Make sure the filament is dry and free from dirt. This can damage the print or weaken the support