🦉 Cute Little Owl – HEDWIG (Singlecolor print)

Meet HEDWIG – an adorable cartoon‑style owl with big expressive eyes, a round body, a cheerful beak, and bright yellow feet. Her friendly expression and contrasting colors make her a perfect desk companion, a charming gift for animal lovers, or a playful decoration for a child’s room. Hedwig’s delightful presence brightens any space instantly.

🖨 Print Settings

• Layer height: 0.16 mm
• Perimeters: 2
• Infill: 7% gyroid
• Supports: organic supports
• Surface effect: fuzzy skin (optional, slicer‑defined)
• Fuzzy skin point distance: 0.3 mm
• Fuzzy skin thickness: 0.3 mm

The fuzzy skin effect adds a subtle, slightly rough texture resembling soft feathers. This effect is optional and depends entirely on your slicer settings.

📏 Model Size

• Standard height: 10 cm
Scaling notes:
• Scaling down is not recommended – it may cause issues with eye assembly and delicate details
• Scaling up works without any issues

🎨 Color Unit

• No AMS, ACE PRO, MMU, etc. required
• The model can be printed easily on a single‑color printer

🧩 Assembly

Each eye consists of three parts that slot directly into the head and are secured with glue.
The beak is glued onto the designated mounting point on the head.
The feet are glued to the body, and their correct positioning is ensured by alignment pins.
Before applying glue, it is recommended to dry‑fit all parts to make sure everything aligns properly and that all components are fully cleaned (for example, from support material).

The assembly process is simple and beginner‑friendly.

🗂 Print Plates

• Plate 1 – owl body
• Plates 2–4 – individual eye colors (black / blue / white) for printers without a color unit
• Plate 5 – complete pair of eyes (three parts: black / white / blue) for sequential printing with AMS / ACE PRO
• Plate 6 – beak and feet

📦 Available Files

• 3MF file for Elegoo printers (Elegoo Slicer, Orca), BambuLab (Bambu Studio) and Anycubic (Anycubic Slicer Next)
• STL files for all other printers