Picture frame with Love Sign (15x10cm/6x4").
This picture frame can be free standing or can be mounted on wall in vertical or horizontal position
( hanging and standing in two directions vertical and horizontal).
It has hangers to hang this frame on the wall.
Holes in frame should be tapped. Be careful to not damage front site during tapping.
In my prototype I used M3x6mm socket head screw because I didn't have counter sink crews in that length so on the picture there are different screws holding back plate.
I've printed this frame using Fiberlogy True Gold PLA

Fasteners needed to assemble the frame.
M3x6mm SHCS( counter sink screw) - 6pcs 
M4x8mm Socket Head Screw -2pcs

Material: PLA, PETG, ABS, ASA etc.
Layer heigh: 0,2 or lower
No supports needed.