mikegyverminis
mgm
print ready
tabletop
miniature
figure
dnd
dungeons and dragons
ttrpg
goblin
worg
worg rider
horde
warband
dd
whip
monster
gaming
paintable
scalable
fantasy
mini
creature
- 0.08mm layer, 2 walls, 15% infill
1-disc
PLA
Designer - 0.4 nozzle 0.08mm layer, 2 walls, 15% infill
1-disc
PLA
Designer
57
17
Goblin Worg Rider - Print-Ready Miniature by Mike Gyver Minis! ⚔️🎲
Unleash havoc with this vicious Goblin Worg Rider, sculpted dynamically mid-strike as he cracks a whip from the back of his snarling giant mount. A crucial fast-attack unit for your tabletop adventures, this model is one of seven unique figures in the Goblin Warband set.
Part of my project building high-quality, print-ready D&D (and other TTRPG) miniatures, perfect for your campaigns! 🐉
⭐ Why Mike Gyver Minis? ⭐
🎨 Designed for Printability: Sculpted and optimized for successful prints on common 3D printers.
🔬 Rigorously Tested: Printed successfully multiple times on Bambu Lab X1C/P2S & K2 Plus (see photos for real print results!).
⚙️ Ready-to-Print Files (Multi-Slicer Support!): Includes TWO tuned `.3mf` project files!
1. For Bambu Studio / OrcaSlicer / PrusaSlicer (`..._FDMConfig.3mf`)
2. For Creality Print (`..._FDMConfig_CP.3mf`)
* Both have tested FDM support settings configured! Also includes an unsupported .stl.
💖 FREE Model! Get the Full, Ever-Growing Library Instantly! 💖
Like this quality? Support the project, get my entire, organized library (updated weekly!) and 1-on-1 print support via Patreon:
➡️ https://www.patreon.com/MikeGyverMinis ⬅️
Explore All My Free Model Sites:
➡️ https://linktr.ee/mikegyverminis 🔗
Spend less time troubleshooting, more time playing! 🎉 or Start your adorable collection today! 🎉
---
🛠️ Print Settings & Advice 🛠️
* Printer Used for Testing: Bambu Lab X1C / P2S / K2 Plus (CoreXY)
* Note: Tested extensively. Results may vary based on your printer type, calibration, and filament.
* Supports: Yes - Use the included `.3mf` file for your slicer! (Recommended!)
* Some models have a small square below them. This is by design, to generate better supports around feet/capes/tails. The square can be discarded.
* Layer Height: 0.08mm
* Infill: 15% Gyroid
* Filament: PLA (Tested with Bambu PLA Basic Blue Grey)
🔥 Important Printing Advice:
1. Prep Matters! 🔑: A Calibrated printer, Clean build plate (🧼 soap & water!), and Dry filament (💧➡️🔥) are essential for success!
2. Support Removal:
* COOL DOWN COMPLETELY first! 🥶
* Use tweezers/cutters ✂️ carefully, starting at the base/brim. Pull supports *down & away*.
* Be extra gentle on thin parts like the Whip, Worg Paws, Harness, Stirrups. 👀 Slow is a smooth removal!
* Minor cleanup (light sanding) where supports touch is normal. ✨
⚙️ .3mf File Info (Please Read!):
* This download includes TWO project files for your convenience:
* 1. ..._FDMConfig.3mf: For Bambu Studio, OrcaSlicer, & PrusaSlicer.
* 2. ..._FDMConfig_CP.3mf: For Creality Print.
* Both files contain the model pre-oriented with my tested FDM support settings.
---
Originality of the Model
The author declares that this work is their personally original model
This model is licensed under the following terms:
This work is licensed under a Standard Digital File License. Digital files have a strict non-commercial, personal use only license.
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital file or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including remixes of this object). You can not host these files on other digital platforms, web stores or cloud repositories. The objects may not be used in any way whatsoever in which you charge money, collect fees.
Models(3)
- Goblin_Worg_Rider_FDMConfig_CP.3mfDesigner
18.17 MB
2026-01-09
- Goblin_Worg_Rider_FDMConfig.3mfDesigner
18.15 MB
2026-01-09
Goblin_Worg_Rider_Unsupported.stlDesigner59.97 MB
2026-01-09
View all(3)
