After printing, I recommend adding rubber feet, used as anti-slip pads for furniture (any arbitrary shape). If you don't have them available, you can of course print squares, cylinders, with a height of about 3-5 mm (also depending on the thickness of the cable, which will be under the model and will be directed backwards or sideways) and then stick them on the legs of the Triceratops model from below.

3MF files for download are for Bambulab printers (Bambu Studio), Anycubic Kobra S1 (Anycubic Slicer Next), Elego Centauri Carbon or Orca Slicer. STL files are of course available.

The lamp lighting is optional, however, you have two options here. Either a light "puck" available at Bambu Store - LED Lamp Kit 001 (marked MH001), or the second option is to connect a 3LED USB key using a USB extension USB-A (male-female).

To connect the light, you will also need either a power source to an electrical outlet with a 5V USB output (up to 1A - approx. 0.6A) or a Power Bank. The MH001 kit is equipped with a switch, the second option does not include a switch, but it is of course not a problem to assign a switch there.

I also tried various other options, such as RGB LED strip, but due to the quantity on the market, I did not make a holder for this option.

Links to buy electronics:

MH001 - Bambu store

https://eu.store.bambulab.com/products/led-lamp-kit-001?modelId=770337

3LED USB lamp (variant 3LED) - Aliexpress

https://www.aliexpress.com/item/1005002557759804.html

USB extension cable (buy from your local supplier, I recommend the thinnest cable possible.