Thank you all for your support. I'm always happy to hear your opinions and suggestions for new models. So please share them in the comments.

You can offer me a coffee and support my work here >>> https://ko-fi.com/drakeforge3d  If you like my work and want to support me, I appreciate any support. The website also includes a commercial license that allows you to sell all my existing models.

Adamantine Golem – Epic Fantasy Boss Miniature

Forged in ancient arcane forges and bound by forgotten runes, the Adamantine Golem stands as an unstoppable guardian of lost vaults and cursed dungeons. This heavily armored construct embodies the raw power and indestructible nature of legendary adamantine, making it a perfect centerpiece miniature for tabletop RPG encounters, dungeon bosses, or epic fantasy displays.

Designed as a high-detail FDM printable model with supports, this miniature captures the imposing presence of a towering magical construct clad in massive full plate armor. Its jagged pauldrons, reinforced plating, and powerful stance give the impression of a being forged purely for battle — a sentinel that has guarded ancient halls for centuries.

Whether used as a boss encounter in tabletop RPG campaigns, a legendary guardian of treasure chambers, or a display piece for fantasy collectors, the Adamantine Golem delivers a powerful visual impact on the table or shelf.

The model is provided in two scale variants to suit different purposes:

• 60 mm version – Perfect as a boss monster for RPG sessions, dungeon encounters, or large-scale tabletop battles.
• 140 mm version – An impressive display statue or ultimate campaign boss, ideal as a centerpiece for fantasy collections or dioramas.

This miniature works beautifully for games inspired by classic fantasy systems like dungeon crawlers, tabletop RPGs, and board games, where towering constructs guard ancient magic and legendary treasures.

Summon the might of forgotten forges and unleash a true adamantine guardian upon your tabletop adventures.

     Guide

Each of my models is printed 2-3 times before releasing the profile. So if you have a problem with printing:

1. DRY THE FILAMENT
2. CHANGE THE NOZZLE TO A NEW ONE.

Recommendations  Guide : In case of a problem with damage to the supports, I recommend reducing the printing speed of the supports by 30-50% and the travel speed to 400mm/s. When removing the supports, I recommend first cutting off the pieces right next to the character, but not removing them, just cutting them off. Remove the remaining larger pieces and only then detach the remaining smaller pieces. This reduces the risk of damaging delicate elements.

• Please note that if you use a different filament than the recommended one, the effect may be different from my print. For example, printing in silk PLA will look better but the supports and the print itself will be more brittle and less durable.

   

   

  Recommendations:

• 
   
• 0.08-0.2. In the event of changing the original height, the height of the supports should be changed.
   

• PLA+HS, PLA+, PLA, PLA silk Recommended materials are listed in order from best to good.

   

• Clean the plate thoroughly before printing.
  Make sure the filament is dry and free from dirt. This can damage the print or weaken the support