✨IF YOU LIKE MY MODELS FOLLOW ME AND SHARE✨

Project: okarun.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.24mm

Filaments Used:
    PLA Black Transmission Distance: 0.3
    PLA Purple Transmission Distance: 2.8
    PLA Pink Transmission Distance: 3.6
    PLA Red Transmission Distance: 3.4
    PLA Beige Transmission Distance: 3.4
    PLA Cian Transmission Distance: 1
    PLA PolyLite White Transmission Distance: 5
 

This print uses 7 unique filaments

Swap Instructions:
    Start with Black
    At layer #8 (0.8mm) swap to Purple
    At layer #9 (0.88mm) swap to Pink
    At layer #10 (0.96mm) swap to Red
    At layer #12 (1.12mm) swap to Beige
    At layer #15 (1.36mm) swap to Cian
    At layer #16 (1.44mm) swap to White for the rest.

Note: for your Perphet alignment with other images in honeycomb mode download the guide

https://www.nexprint.com/en/models/ G0471687?printConfigId = G0369851

Every impulse helps me to continue creating new designs. I appreciate your support so much!

Don't forget to like it and save it so you can find it easily later!