Thank you all for your support. I'm always happy to hear your opinions and suggestions for new models. So please share them in the comments.

You can offer me a coffee and support my work here >>> https://ko-fi.com/drakeforge3d  If you like my work and want to support me, I appreciate any support. The website also includes a commercial license that allows you to sell all my existing models.

Rubbleborn Stone Golem – Elemental RPG Miniature

Formed from shattered masonry, broken cobblestones, and the remnants of ancient ruins, this Rubbleborn Stone Golem is a towering mass of jagged rock and raw elemental force. Each fragment in its body carries the memory of collapsed fortresses, toppled statues, and battle-scarred walls. Its form is uneven and brutal, shaped not by craftsmanship but by destruction itself.

Often conjured by geomancers, ruin keepers, or vengeful spirits bound to forgotten places, this golem moves with heavy, grinding steps—each one echoing like a collapsing tower. In battle, it crushes foes with massive debris-laden fists, and fragments of rubble fall from its body as it fights, only to pull new stones from the earth to rebuild itself.

Designed for FDM 3D printing, the model features bold, faceted rock textures that print cleanly and paint beautifully, making it ideal for dungeon crawls, ruined-city encounters, or elemental guardians in your tabletop adventures.

Bring this ruin-forged titan into your campaign—download the model and let the earth tremble at your table!

     Guide

Each of my models is printed 2-3 times before releasing the profile. So if you have a problem with printing:

1. DRY THE FILAMENT
2. CHANGE THE NOZZLE TO A NEW ONE.

Recommendations  Guide : In case of a problem with damage to the supports, I recommend reducing the printing speed of the supports by 30-50% and the travel speed to 400mm/s. When removing the supports, I recommend first cutting off the pieces right next to the character, but not removing them, just cutting them off. Remove the remaining larger pieces and only then detach the remaining smaller pieces. This reduces the risk of damaging delicate elements.

• Please note that if you use a different filament than the recommended one, the effect may be different from my print. For example, printing in silk PLA will look better but the supports and the print itself will be more brittle and less durable.

   

   

  Recommendations:

• 
   
• 0.08-0.2. In the event of changing the original height, the height of the supports should be changed.
   

• PLA+HS, PLA+, PLA, PLA silk Recommended materials are listed in order from best to good.

   

• Clean the plate thoroughly before printing.
  Make sure the filament is dry and free from dirt. This can damage the print or weaken the support