✨ IF YOU LIKE MY MODELS, FOLLOW ME AND SHARE ✨

Project: Goku.hfp
Print at 100% infill with a layer height of 0.08mm and a base layer thickness of 0.24mm

Filaments Used:
    PLA Black – Transmission Distance: 0.8
    PLA Red – Transmission Distance: 5.1
    PLA Orange – Transmission Distance: 5.9
    PLA White – Transmission Distance: 9.6
This print utilizes 4 distinct filaments

Swap Instructions:
    Begin with Black
    At layer #6 (0.64mm), swap to Red
    At layer #10 (0.96mm), swap to Orange
    At layer #13 (1.20mm), swap to White for the remainder of the print.

Note: For optimal alignment with other honeycomb‑style models, download the accompanying guide.

https://www.nexprint.com/en/models/G0471687?printConfigId=G0369851

Every like helps me keep creating new designs—your support means the world to me!

Don’t forget to hit “Like” and save this model—it’ll be easy to find again later!