Because the sound of the camera is very poor, so I bought a Sony PX470 voice recorder, and to make it more portable, I made this hot shoe mount, which can fix the voice recorder to the camera during shooting, and at the same time ensure good sound recording, and the default print configuration is used to install the Sony PX470, and this accessory consists of two accessories, which need to be installed with two M3*10 screws, and if you are using another model of voice recorder, don't worry, I also shared the STEP file of the bracket on the model page You can download it and modify it yourself, in the default configuration, I used PLA and PETG to support each other to achieve the most perfect printing result, if you don't have ams, you can use another printing configuration, thank you for downloading

由于相机自带的收音非常差 所以我购买了索尼PX470录音笔 为了让它更便于携带 我就制作了这款热靴支架 可以在拍摄过程中将录音笔固定在相机上 同时保证良好的收音效果 默认的打印配置用于安装索尼px470 该配件由两个配件组成 需要使用两个M3*10螺丝安装  如果您使用的是其他型号的录音笔 也不用担心 我在模型页面同时分享了支架的STEP文件 您可以下载后自行修改  在默认配置中我使用了pla和petg相互支撑 以达到最完美的打印效果 如果您没有ams 可以使用另一个打印配置 感谢您的下载