Aletas model vase.

From the collection "32 vases".

Inspired by fish fins.

Ideal for decoration, as well as being a useful vase to place flowers or anything you want.

3D printing settings

For the model, you must specify VASEMODE or the parameters I followed in the slicer programme (I used Cura):

• Infill: 0%
• No support
• No adhesion
• Layer height: 0.2 mm or +
• Top layers: 0
• Bottom layers: 5 or +
• Wall line count: 3 or +
• Nozzle size: 0.4 mm (if you have a bigger nozzle you can decrease the wall lines)
• Nozzle temperature: 200ºC (for standard PLA)