A Like, Rating or Comment is a huge help and I really appreciate all of it. 🙏

Want to support my work? 
You can buy me a coffee and support my work here: https://ko-fi.com/mikegyverminis

Commercial Licensing is also available here as well to sell all of my models
 

Looking for More DnD Minis?

Check out the whole collection with new ones added all the time.

==========================================================

DnD TTRPG Zombie Bear Miniature

Lumbering forward on rotted, powerful legs, the zombie bear is a grisly powerhouse of undeath, its decaying fur and exposed bone doing little to diminish its terrifying, crushing strength. Driven by a ceaseless hunger, this monstrous horror is a nightmarish corruption of the wilderness's most fearsome predator.

Nozzle: 0.4

Layer Height: 0.08mm

Post Processing: Use thin tweezers to Pull supports down and out after cutting from the brim/base first. Be careful around the claws  as they're thinner. These just need extra care and patience.  Some smoothing (sanding etc) after the supports are removed, may be required. 

Assembly: This model comes in 2 halves that need to be glued together. Glue Part A to Part B with glue like Crazy Glue. After gluing may require some miniature filler prior to painting.

Housekeeping: Make sure your printer is Calibrated, Build Plate washed and Filament Dried so the supports have the best adhesion possible. Let the miniature fully cool down before removing supports.