Thank you all for your support. I'm always happy to hear your opinions and suggestions for new models. So please share them in the comments.

You can offer me a coffee and support my work here >>> https://ko-fi.com/drakeforge3d  If you like my work and want to support me, I appreciate any support. The website also includes a commercial license that allows you to sell all my existing models.

Xenomorph Alien on Rock –  Display Figure

Bring a piece of sci-fi horror into your collection with this detailed Xenomorph figure, inspired by the legendary Alien universe. Posed in a dynamic stance atop a rocky base, the model makes a striking display piece for any desk, shelf, or collection cabinet.

This model has been thoroughly tested in multiple scales and printed on an FDM 3D printer using both basic PLA and matte PLA filaments. The supports are easy to remove, and the printing process has been optimized with slower, safer settings to ensure high-quality results with crisp details.

Perfect as a collector’s item, decorative piece, or painting project, this Xenomorph figurine captures the menacing aesthetic of one of science fiction’s most iconic creatures.

 Download and print your own – a must-have for every Alien fan!

     Guide

Each of my models is printed 2-3 times before releasing the profile. So if you have a problem with printing:

1. DRY THE FILAMENT
2. CHANGE THE NOZZLE TO A NEW ONE.

Recommendations  Guide : In case of a problem with damage to the supports, I recommend reducing the printing speed of the supports by 30-50% and the travel speed to 400mm/s. When removing the supports, I recommend first cutting off the pieces right next to the character, but not removing them, just cutting them off. Remove the remaining larger pieces and only then detach the remaining smaller pieces. This reduces the risk of damaging delicate elements.

• Please note that if you use a different filament than the recommended one, the effect may be different from my print. For example, printing in silk PLA will look better but the supports and the print itself will be more brittle and less durable.

   

   

  Recommendations:

• 
   
• 0.08-0.2. In the event of changing the original height, the height of the supports should be changed.
   

• PLA+HS, PLA+, PLA, PLA silk Recommended materials are listed in order from best to good.

   

• Clean the plate thoroughly before printing.
  Make sure the filament is dry and free from dirt. This can damage the print or weaken the support