Detailed 3D-printed giant spider miniature available in two sizes: a 'boss' version at 100% scale, and a larger variant for use as a more imposing enemy. The boss size is shown here for comparison next to a 38 mm miniature (including base). Designed for FDM printing with a 0.8 mm , the model features sharp details and supports that are easy to remove, making it ideal for tabletop RPG encounters

D&D 5e Giant Spider Boss

Special Traits:

• Spider Climb: Can climb difficult surfaces, including upside down, without a check.
• Web Sense: Detects vibrations in webs within 60 ft.
• Web Walker: Ignores movement restrictions caused by webs.

Actions:

• Bite (Melee Weapon Attack): +5 to hit, reach 5 ft., one target. Hit: 7 (1d8+3) piercing damage plus 7 (2d6) poison damage (DC 12 CON save for half).
• Web (Recharge 5–6): Ranged Weapon Attack +5 to hit, range 30/60 ft., one target. Hit: The target is restrained by webbing (DC 12 STR check to escape).

     Guide

Each of my models is printed 2-3 times before releasing the profile. So if you have a problem with printing:

1. DRY THE FILAMENT
2. CHANGE THE NOZZLE TO A NEW ONE.

Recommendations  Guide : In case of a problem with damage to the supports, I recommend reducing the printing speed of the supports by 30-50% and the travel speed to 400mm/s. When removing the supports, I recommend first cutting off the pieces right next to the character, but not removing them, just cutting them off. Remove the remaining larger pieces and only then detach the remaining smaller pieces. This reduces the risk of damaging delicate elements.

• Please note that if you use a different filament than the recommended one, the effect may be different from my print. For example, printing in silk PLA will look better but the supports and the print itself will be more brittle and less durable.