star wars
statue
evil
sith
marble
robe
swtor
Sith Lord Statue
Print Profile(1)
- 0.2mm layer, 2 walls, 15% infill
1-disc
PLA
Designer
12
4
Released 2025-08-09
The model is based on the Sith lord statues seen in the Star Wars Knights of the Old Republic video game.
Printing
- It needs support, but it is very easy to remove if you let it cool down. You can see the support in one of the images I uploaded.
- For my print, I used a 0.4 nozzle, 0.2mm layer height, and marble filament, which works great.
- I would not recommend increasing the nozzle size, as you lose too much detail.
- If using a 0.2 nozzle, be careful with marble filament, as it easily clogs
Size
- It is 44x44x108mm.
- I have uploaded images where you can see it in a bookcase.
- I have not tried it, but you should be able to scale it up.
Copyright
- This is not an official Star Wars model.
- The model can not be used commercially.
- I do not represent Disney in any way.
Originality of the Model
The author declares that this work is their personally remixed model
Original creator:
Vol
Adaptation source:https://www.thingiverse.com/thing:342214
This model is licensed under the following terms:
Credit must be given to the creator
Only noncommercial uses of the work are permitted
Remixes must be shared under the same license
Models(2)
- Sith Lord Statue.3mfDesigner
1.12 MB
2025-08-09
Sith Lord Statue.stlDesigner425.47 KB
2025-08-09
No more
