This is the new sunglasses holder design that I designed myself.

It can be mounted on the wall, I made one 5mm holes for this.

Print settings:

• layer height: 0,16
• infill: 15-25%
• support: yes
• brim: optional
• Top Surface Pattern: Archimedean

I used PLA Silk Dual filament ( black and purple) for the "lenses" of the glasses, because of the reflective effect. i also used PLA Dual Silk filament (black and gold) the part around the lens, PLA+ Black to the frame, and WOOD PLA (Original Wood) for base.

If you like my uploaded model, please take a look at my other works