strong and removable from wall. designed for easy access to the back wall for electrical panels or plumbing access point

Suggested max weight: 10kg per wall bracket (20 spools for 2 brackets on left and right side)

Make sure to use wall anchors for drywall, or screw in to a wooden stud. Print the wall mounts with ASA, PA6 or stronger. 

Diameter of 29 (for 28mm wooden dowel). Can be changed in .STEP file, or used with a spacer. Use caution with thinner dowels as they are more likely to bend or snap. For my rack, i used a 28mm dowel in the front, and a 21mm dowel in the back with a spacer. Model spacers to be a C-shape for flexing and to make way for the screw in the bottom.

PLA is fine for the bracket if enough wall loops and infill is used. 

Use the attached modifier to strengthen the most critical parts of the rack: