I love this design, and have printed it previously using "pause at height" to get silver writing on black background. I wanted to see if I could take this design and allow both colors on the same plane.

WHEN PRINTING:
Enable Z-hop (height of .5mm at least) If you haven't done this before, watch CHEP's video and that should make it clear.
https://www.youtube.com/watch?v=0Sla-vIsvh4

You will have to flip the print and mirror on build plate in order to have it print readable. (I included a picture of what it looks like looking up through the bottom. That's how you know it is correct - note the backward ENDER 3 logo)

Something I learned the hard way - IF YOU HAVE BLTOUCH, don't center print because when printing the second part, it will touch the print and use that as z=0. I just bring mine forward about 50mm.

Hope you enjoy!